• M381E 07.12.NF.5 *M381EN05* DS Camera Control Unit DS-U2 DS Camera Head DS-Fi1/DS-5M/DS-2Mv/DS-2MBW DS Cooled Camera Head DS-Qi1Mc/DS-5Mc/DS-2MBWc/DS-Ri1 (Ver.4.0) • Thank you for purchasing the Nikon products. This instruction manual has been prepared for users of the DS Camera Control Unit DS-U2, DS Camera Head DS-Fi1/DS-5M/DS-2Mv/DS-2MBW, DS Cooled Camera Head DS-Qi1Mc/DS-5Mc/DS-2MBWc/DS-Ri1.

Nikon Usb Ds Camera U2 Driver for Windows 7 32 bit, Windows 7 64 bit, Windows 10, 8, XP. Uploaded on 4/22/2019, downloaded 6525 times, receiving a 80/100 rating by 3683 users. Nikon Usb Ds Camera U2 driver direct download was reported as adequate by a large percentage of our reporters, so it should be good to download and install.

To ensure correct use, please read this manual carefully before use. • To prevent fire or burn injury due to the breakage of a cable, do not excessively bend nor twist the cables. • To prevent fire due to heating, do not place a cloth or paper on the DS-U2 nor block the vent of the DS-U2. Turn off the power before assembling the product or connecting /disconnecting cables. To prevent failure or malfunction, be sure to turn off the power switch of the DS-U2 before assembling the product or connecting/disconnecting a cable.

• 2 Components.. Chertezhi link ora yamato. 2 Chapter 2 Peripheral Equipment..3 Chapter 3 Names of Parts and Their Functions..

5 1 DS Camera Control Unit DS-U2.. 5 2 DS Camera Head..7 Chapter 4 Connecting and Installing the Equipment..8 1 Connection Diagrams..

• Chapter 1 Before Use Models of the DS Camera Head Before Use Models of the DS Camera Head Eight models of DS camera head are provided as follows. The features differ depending on the type you have purchased.

Check the type name indicated on the DS camera head before use. Model name is indicated on the tripod mount or a place near the camera cap attachment location. • Before Use Components Components Check to see that all the items listed below are provided in the package.

If any items are missing, contact your nearest Nikon representative immediately. DS Camera Control Unit DS-U2 Power cord Vertical stand Camera cable 3 m E229586. • Peripheral Equipment Peripheral Equipment (1) Personal computer (PC) The DS-U2 is connected to a PC via a USB2.0 interface. The DS-U2 can perform the following operations via the NIS-Elements freeware on the PC. Display the captured images on the PC monitor.

• Chapter 2 Peripheral Equipment (2) USB cable A USB cable is used to connect the DS-U2 to the PC. Buderus ecomatic 4000 schaltplan pdf free. We recommend a USB 2.0-compatible AB-type cable. (3) C mount lens A C mount lens is required to photograph subjects other than photomicrographs. Any lens that meets the following conditions may be used: •. • Chapter 3 Names of Parts and Their Functions DS Camera Control Unit DS-U2 Names of Parts and Their Functions DS Camera Control Unit DS-U2 External appearance of the DS-U2 Ventilation hole (on the top): For internal cooling Ventilation hole (on the left). • Front of the DS-U2 Power indicator When power is turned on, the indicator first flashes green, and then turns to green. When the indicator lights up in green, the DS-U2 is ready for operation.

Power switch This is a push switch. • Chapter 3 Names of Parts and Their Functions DS Camera Head DS Camera Head Tripod mount Mounts the DS camera head on a tripod, etc. Bottom Rear C mount cap CAMERA OUT connector Protects the C mount from dusts. C mount When taking microphotographs, mount the C mount adapter here before connecting to the microscope. • Connecting and Installing the Equipment Connection Diagrams Connecting and Installing the Equipment Connection Diagrams Schematic diagram DS camera head DS AC adapter USB 2.0 cable camera cable DS-U2 (Front) USB cable provided with the microscope Nikon 80i/90i microscope - 8.

• Chapter 4 Connecting and Installing the Equipment Connection Diagrams Connectors Front of the DS-U2 Trigger signal output device (Can be connected only when DS-Qi1Mc or DS-Ri1 is used.) Nikon 80i/90i microscope Rear of the DS-U2 DS camera cable USB 2.0 cable. • Remove the two screws at the upper front position and the lower rear position among four screws on the right side of the DS-U2.

(See Figure A below.) Then, fix the stand to the right surface of the DS-U2 using the removed screws. (See Figure B below.) Use an M2.5-size Phillips driver to attach or detach screws. • DS camera head can also be used to mount the DS camera head on a tripod. (2) Connecting to a PC with a USB Cable Connect the USB connector on the PC and the USB (D) connector on the DS-U2 using the USB 2.0 cable (AB type). • Connect the digital imaging head mounted on the 80i or the 90i microscope to the USB (H) connector of the DS-U2. Be sure to use the USB cable provided with the microscope. (4) When connecting external devices (trigger signal output devices) Before connection, always turn off the DS-U2 and external devices.