SL2-141/SL2-141-I ADSL Router. User’s Manual. Thank you for choosing the Asymmetric Digital Subscriber Line (ADSL) Router. ³ The boot loader contains very simple web page to allow the users to update the run-time firmware image. ³ Configuration file backup and restore.

• Quick Start Guide SIEMENS SL2-141-I ADSL WLAN Router • Do never open the housing! • Use only the power supply provided with this device. • Use only the cables provided with this device and do not perform any modifications on them. • Before you begin Verify that the following items came with your SIEMENS SL2-141-I kit: SIEMENS SL2-141-I USB cable (blue) Optional: If your service provider include an ISDN ADSL-Splitter, follow the instructions in section “Step 1: Install the ISDN ADSL-Splitter”.

If you need further assistance installing the filter, please contact your service provider. • Step 1: Install the ISDN ADSL Splitter The ADSL technology uses the existing telephone line for the broadband entrance. With the ISDN installation a ISDN ADSL-Splitter must be installed to separate the frequency ranges of ADSL and ISDN and to prevent disturbances at ISDN phones or fax machines.

Use for installati- on the provided ISDN ADSL-Splitter. • (same construction as the ADSL-Splitter cable) into the middle plug of the ADSL-Splitter.

The middle plug is marked with a none crossed symbol of a phone. Connect the end of the phone cable into the “Line” plug of the ISDN-NTBAs. Telephone socket to the SIEMENS SL2-141-I ADSL WLAN Router ADSL-Splitter. Turn your computer on and wait until your operating system (OS) is started up. Proceed with step 3 (Read first the introduction and continue then with the paragraph related to your operating system). SIEMENS SL2-141-I ADSL WLAN Router ADSL cable (gray) • Windows 98 users need the Windows 98 CD-ROM to complete the installation. Insert the SIEMENS installation CD-ROM in your CD-ROM drive. My little pony fighting is magic tribute edition download.

The CD will be startet automatically. In case the “setup wizard” does not start automatically, open a Run window via Start -. • Configure the PC (TCP/IP settings) Introduction In step 4, you will learn how to configure your computer to communicate with the SIEMENS ADSL WLAN Router.

To do this, you will need to configure your PC’s network settings to obtain an IP address auto- matically. • Step 4a: Configure the PC (TCP/IP settings) for Windows 98 and Windows ME Windows 98 users need the Windows 98 Installation CD to complete the installa- tion. Click on Start -> Settings -> Control Panel. Double-click on the Network icon to open the Network screen.

• Step 4b: Configure the PC (TCP/IP settings) for Windows NT4 1. Click on Start -> Settings -> Control Panel. Double-click on the Network icon. The Network screen will appear.

Select the Protocol tab and highlight the TCP/IP line. Click on Properties. • Step 4c: Configure the PC (TCP/IP settings) for Windows 2000 1. Click on Start -> Settings -> Control Panel. Double-click on the Network and Dial-up Connections icon. The Network screen will appear. Select the Local Area Connection icon for the applicable Ethernet adapter (usually it is the first Local Area Connection listed).

• Step 4d: Configure the PC (TCP/IP settings) for Windows XP The following instructions assume you are running Windows XP’s default interface. If you are using the Classical interface (where the icons and menus look like previous Windows ver- sions), please follow the instructions for Windows 2000 (Step 4c). • Step 4e: Configure the PC (TCP/IP settings) for Windows Vista 1. Click on start -> Control Panel. Click on the Network and Sharing Center icon. Click on Broadband Connections → Properties.

The “Local Area Connection Status” screen will appear. Click on the Properties button. • Step 4f: Configure the PC (TCP/IP settings) for Mac OS 9.x 1. From the Apple Menu, point to Control Panels and then click TCP/IP. From the Connect via pull-down menu select Ethernet built-in. From the Configure pull-down menuselect Using DHCP Server.